r1ch.net forums
* Home Help Search Login Register
r1ch.net  |  r1ch.net stuff  |  R1Q2  |  Topic: 2 r1q2 problems.
Pages: [1] Print
Author Topic: 2 r1q2 problems.  (Read 5874 times)
[BTF]adaM
Guest
« on: July 13, 2006, 05:50:33 am »
Hi there.

There's two problems i've got with R1Q2, which I *was* attempting to give a go instead of Aprq2, for awhile to see if I could get used to it.

however, there are some problems maybe someone can help me with:

1) R1GL, I try to use this, set vid_ref "r1gl" in config, a
Logged
[BTF]adaM
Guest
« Reply #1 on: July 13, 2006, 05:54:15 am »
err for some reason it posted it incomplete:

Hi there.

There's three problems i've got with R1Q2, which I *was* attempting to give a go instead of Aprq2, for awhile to see if I could get used to it.

however, there are some problems maybe someone can help me with:

1) R1GL, I try to use this, set vid_ref "r1gl" in config, and it loads r1q2 up fine, except whenever I try to go into a map (or do anything other than the escape menu / console, it shuts down with a weird error (I can post if you wish), and closes down, also giving a windows error (the send error report).

2)When trying to connect to a server, it says "connecting: blah.blah.blah.blah" for any server I try, and none show up in the address book at all.. so basically it refuses to connect to anything

3)The autoupdater wont work, despite deleting, re downloading, trying again etc.

note: all on winders xp.
Logged
R1CH
Administrator
Member

Posts: 2625
« Reply #2 on: July 13, 2006, 05:57:33 am »
Please post the crash report. Also be sure you're using latest versions of both R1Q2/R1GL. It sounds like you have net connection / firewall issues too, the autoupdater itself only connects to r1ch.net using HTTP so you should have no problems running that.
Logged
[BTF]adaM
Guest
« Reply #3 on: July 13, 2006, 07:11:41 am »
okay, by the way, the autoupdater doesent even open properly, it seems to just flicker for a millisecond :/ id get the latest versions if i could get the AU to work Tongue 

crash report:

R1Q2 encountered an unhandled exception and has terminated. If you are able to
reproduce this crash, please submit the crash report to r1ch.net when prompted or
post this file and the crash dump .dmp file (if available) on the R1Q2 forums at
unable to post url
     PLEASE MAKE SURE YOU ARE USING THE LATEST VERSIONS OF R1Q2/R1GL/ETC!

This crash appears to have occured in the 'ref_r1gl.dll' module.
Since this crash appears to be inside R1Q2 or R1GL, it would be very helpful
if when prompted, you submitted the crash report to r1ch.net. This will aid in
finding the fault that caused this exception.

**** UNHANDLED EXCEPTION: c0000005
Fault address: 10002E0B (ref_r1gl.dll)
R1Q2 module: r1q2.exe(R1Q2-x86) (Version: R1Q2 b6557 x86 Apr 26 2006 Win32 RELEASE)
Windows version: 5.1 (Build 2600)

Symbol information:
r1q2.exe, couldn't check symbols (error 87, DBGHELP.DLL too old?)
ntdll.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
kernel32.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
WINMM.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
USER32.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
GDI32.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
ADVAPI32.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
RPCRT4.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
WSOCK32.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
WS2_32.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
msvcrt.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
WS2HELP.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
DSOUND.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
ole32.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
VERSION.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
uxtheme.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
nvoglnt.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
OpenAL32.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
wdmaud.drv, couldn't check symbols (error 87, DBGHELP.DLL too old?)
msacm32.drv, couldn't check symbols (error 87, DBGHELP.DLL too old?)
MSACM32.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
midimap.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
wrap_oal.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
CLBCATQ.DLL, couldn't check symbols (error 87, DBGHELP.DLL too old?)
OLEAUT32.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
COMRes.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
KsUser.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
ref_r1gl.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
opengl32.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
GLU32.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
DDRAW.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
DCIMAN32.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
mswsock.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
wshtcpip.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
gamex86.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)
DBGHELP.dll, couldn't check symbols (error 87, DBGHELP.DLL too old?)

Enumerate loaded modules:
[0x00400000 - 0x00BE4000] r1q2.exe (8273920 bytes, version 6.5.5.7)
[0x77F50000 - 0x77FF6000] ntdll.dll (679936 bytes, version 5.1.2600.114)
[0x77E60000 - 0x77F40000] kernel32.dll (917504 bytes, version 5.1.2600.153)
[0x76B40000 - 0x76B6C000] WINMM.dll (180224 bytes, version 5.1.2600.0)
[0x77D40000 - 0x77DC6000] USER32.dll (548864 bytes, version 5.1.2600.152)
[0x77C70000 - 0x77CAE000] GDI32.dll (253952 bytes, version 5.1.2600.151)
[0x77DD0000 - 0x77E5B000] ADVAPI32.dll (569344 bytes, version 5.1.2600.0)
[0x78000000 - 0x7806F000] RPCRT4.dll (454656 bytes, version 5.1.2600.135)
[0x71AD0000 - 0x71AD8000] WSOCK32.dll (32768 bytes, version 5.1.2600.0)
[0x71AB0000 - 0x71AC5000] WS2_32.dll (86016 bytes, version 5.1.2600.0)
[0x77C10000 - 0x77C63000] msvcrt.dll (339968 bytes, version 7.0.2600.0)
[0x71AA0000 - 0x71AA8000] WS2HELP.dll (32768 bytes, version 5.1.2600.0)
[0x51080000 - 0x510E1000] DSOUND.dll (397312 bytes, version 5.3.1.904)
[0x771B0000 - 0x772C3000] ole32.dll (1126400 bytes, version 5.1.2600.136)
[0x77C00000 - 0x77C07000] VERSION.dll (28672 bytes, version 5.1.2600.0)
[0x5AD70000 - 0x5ADA4000] uxtheme.dll (212992 bytes, version 6.0.2600.0)
[0x69500000 - 0x69A3B000] nvoglnt.dll (5484544 bytes, version 6.14.10.8421)
[0x025B0000 - 0x025C6000] OpenAL32.dll (90112 bytes, version 6.14.357.13)
[0x72D20000 - 0x72D29000] wdmaud.drv (36864 bytes, version 5.1.2600.0)
[0x72D10000 - 0x72D18000] msacm32.drv (32768 bytes, version 5.1.2600.0)
[0x77BE0000 - 0x77BF4000] MSACM32.dll (81920 bytes, version 5.1.2600.0)
[0x77BD0000 - 0x77BD7000] midimap.dll (28672 bytes, version 5.1.2600.0)
[0x02730000 - 0x0294F000] wrap_oal.dll (2224128 bytes, version 2.0.8.0)
[0x7C620000 - 0x7C6A1000] CLBCATQ.DLL (528384 bytes, version 2001.12.4414.53)
[0x77120000 - 0x771AB000] OLEAUT32.dll (569344 bytes, version 3.50.5014.0)
[0x77050000 - 0x77115000] COMRes.dll (806912 bytes, version 2001.12.4414.42)
[0x5EF80000 - 0x5EF84000] KsUser.dll (16384 bytes, version 5.3.0.900)
[0x10000000 - 0x10103000] ref_r1gl.dll (1060864 bytes, version unknown)
[0x5ED00000 - 0x5EDC6000] opengl32.dll (811008 bytes, version 5.1.2600.0)
[0x68B20000 - 0x68B3E000] GLU32.dll (122880 bytes, version 5.1.2600.0)
[0x51000000 - 0x51050000] DDRAW.dll (327680 bytes, version 5.3.1.904)
[0x73BC0000 - 0x73BC6000] DCIMAN32.dll (24576 bytes, version 5.1.2600.0)
[0x71A50000 - 0x71A8B000] mswsock.dll (241664 bytes, version 5.1.2600.0)
[0x71A90000 - 0x71A98000] wshtcpip.dll (32768 bytes, version 5.1.2600.0)
[0x20000000 - 0x20071000] gamex86.dll (462848 bytes, version unknown)
[0x6D510000 - 0x6D58C000] DBGHELP.dll (507904 bytes, version 5.1.2600.0)

Stack trace:
Stack    EIP      Arg0     Arg1     Arg2     Arg3     Address
0012D164 10002E0B 00000000 00000000 00000000 00000000 ref_r1gl.dll!0x10002E0B
Logged
adam
Guest
« Reply #4 on: July 13, 2006, 07:18:35 am »
you were correct, zonealarm was blocking r1q2, even though zone alarm wasnt running i think it runs as a service in the background =/, well thats fixed. thanks..  just the r1gl stuff now
Logged
R1CH
Administrator
Member

Posts: 2625
« Reply #5 on: July 13, 2006, 02:08:37 pm »
Try running the updater now the firewall issue is fixed, the ref_r1gl.dll has "version unknown" which means it must be pretty old.
Logged
adam
Guest
« Reply #6 on: July 13, 2006, 02:19:27 pm »
Thanks, sorted. :] now to try and switch to r1q2.
Logged
Pages: [1] Print 
r1ch.net  |  r1ch.net stuff  |  R1Q2  |  Topic: 2 r1q2 problems.
Jump to:  

Powered by SMF 1.1.18 | SMF © 2013, Simple Machines